Setup Temperature Sensors

My machine keeps overheating and while I hunt for thermal paste my superkaramba wiget Cynapse keeps me upto date on the weather conditions inside the cabinet.
My Mobo: MicroStar International (MSI) KM266
My CPU: AMD Athlon XP 2200

Links to setup the lm_sensors:
Using Torsmo to Monitor Hardware
Getting SuperKaramba Sensors to Work in Fedora Core I

Output of my sensors-detect:

I will now generate the commands needed to load the I2C modules.
Sometimes, a chip is available both through the ISA bus and an I2C bus.
ISA bus access is faster, but you need to load an additional driver module
for it. If you have the choice, do you want to use the ISA bus or the
I2C/SMBus (ISA/smbus)?

To make the sensors modules behave correctly, add these lines to
/etc/modprobe.conf:

#----cut here----
# I2C module options
alias char-major-89 i2c-dev
#----cut here----

To load everything that is needed, add this to some /etc/rc* file:

#----cut here----
# I2C adapter drivers
modprobe i2c-viapro
modprobe i2c-isa
# I2C chip drivers
modprobe eeprom
modprobe w83627hf
# sleep 2 # optional
/usr/bin/sensors -s # recommended
#----cut here----

WARNING! If you have some things built into your kernel, the list above
will contain too many modules. Skip the appropriate ones! You really should
try these commands right now to make sure everything is working properly.
Monitoring programs won't work until it's done.

Output of sensors -f:

sorceress:/etc/rc.d # sensors -f
w83697hf-isa-0290
Adapter: ISA adapter
VCore:     +1.55 V  (min =  +1.71 V, max =  +1.89 V)
+3.3V:     +3.09 V  (min =  +3.14 V, max =  +3.47 V)
+5V:       +4.89 V  (min =  +4.76 V, max =  +5.24 V)       ALARM
+12V:     +11.31 V  (min = +10.82 V, max = +13.19 V)       ALARM
-12V:     -11.87 V  (min = -13.18 V, max = -10.80 V)       ALARM
-5V:       -4.85 V  (min =  -5.25 V, max =  -4.75 V)       ALARM
V5SB:      +5.30 V  (min =  +4.76 V, max =  +5.24 V)
VBat:      +2.96 V  (min =  +2.40 V, max =  +3.60 V)       ALARM
fan1:        0 RPM  (min = 3813 RPM, div = 2)
fan2:     3901 RPM  (min = 10384 RPM, div = 2)
temp1:       +86°F  (high =  +104°F, hyst =   +32°F)   sensor = thermistor      
temp2:    +187.7°F  (high =  +248°F, hyst =  +239°F)   sensor = diode
alarms:   Chassis intrusion detection                      ALARM
beep_enable:
          Sound alarm disabled

eeprom-i2c-0-51
Adapter: SMBus Via Pro adapter at 5000
Memory type:            DDR SDRAM DIMM
Memory size (MB):       256

eeprom-i2c-0-50
Adapter: SMBus Via Pro adapter at 5000
Memory type:            DDR SDRAM DIMM
Memory size (MB):       256